ARM-PRO INFRARED SLENDER LIMB AND ARM WRAPS
FAR INFRARED (FIR) HEAT WRAPS FOR ARMS OR CALVES / FIR BODY SHAPER
FOR SPORTS INJURIES AND PERSONAL THERAPEUTIC TREATMENTS / FIR BODY SHAPER

 

These Arm & Limb Wraps harness Far Infrared thermal energy (FIR) and use it to penetrate target areas of the body such as arms and lower legs.

Designed for safety: soft waterproof fabric with flexible tensile capabilities whatever the sitting or standing position. Safe heating circuits are designed to withstand any stretches or bends.

This system adopts space-age Infrared carbon-fiber technology together with an advanced electronic control system. Allows easy adjustment of temperatures and times for individual needs in one or both wraps simultaneously.

 
Limb and Arm Shaping System
Relaxes the Muscles and Decreases Muscle Spasms
Good adjunct to fitness/weight loss routines
Lessen Pain
Decrease Stiffness in Tendons and Ligaments
 

 
INFRARED FIR) SLENDER ARM & LIMB WRAP COMPOSITION AND FUNCTIONS:
 
INFRARED(FIR) ARM & LIMB WRAPS MODEL (MY-2K):


HOW TO USE INFRARED SLENDER LIMB WRAP:

1. Strap the Far Infrared Arm & Limb Wrap around the chosen body part (arm, lower leg, thigh). The Far Infrared Limb Wrap should completely surround your body without becoming creased, doubled over or folded. To achieve the heating effect, do not strap the Far Infrared Limb Wrap on too tightly.
2. Check to see if your household voltage is the same as that printed on the plug before plugging the device in.
3. Press the ‘MODE” to switch between temperature and timer setting.
4. Press to increase or press to decrease the temperature from 30 °C - 60°, 1 °C for each time pressed.
5. Press to increase or press to decrease the time from 5 ~ 95 minutes, 5 minutes for each time pressed.
6. Press Start to heat.
7. At the end of the session, towel off the sweat and wait 15 or 20 minutes before showering or having a bath, eating or drinking cold drinks. Do not worry if your skin is reddish: this reaction is due to the constant temperature it has been exposed to and will disappear after a couple of hours.
8. Once you have finished your session, take off the Far Infrared Limb Wrap and spread it out on a flat surface until it cools down. Then clean it with a damp cloth and dry it. Store in a dry place.
 

 
INFRARED (FIR) ARM & LIMB WRAP CONTROL PANEL
 
Mode Key Switches the mode between TEMP or TIMER
Temperature Key Press to increase or press to decrease the temperature from 30 °C - 60°, 1 °C for each time pressed.
Timer Key Press to increase or press to decrease the time from 5 ~ 95 minutes, 5 minutes for each time pressed.
Start Key Press Start key to start or stop the device after setting the temperature and timer. The Start key also act as the switch back to TEMP or TIMER setting.
 

 
INFRARED LIMB WRAPS TECHNICAL SPECIFICATIONS:
Model MY-2K
 Voltage AC240V 60W
 Material PU (polyurethane) fabric , Space Carbon Fiber
 Dimensions (End to End) Width x Length : 43 x 50 (cm) / 17.2 x 20 (inches)
 Temperature  30°C ~ 60°C *(Actual temperature may vary when in use)
 Timer 0-95 Min
 Net Weight 400 g / 0.082 lb (Each Wrap)
 Package Info Width x Length x Height: 19 x 30 x 26 (cm) / 7.6 x 12 x 10.4 (inches)
Weight: 2315 g / 5.1lb
Limb Wrap X 2 ( can be used on arms or calves)
Control Box X 1
Manual X 1
Warranty 1 year

 

 
     
 
Copyright © 2009 Infrared. All Rights Reserved. Web design by JustSimple.