Zonal Infrared Thermal Beauty Blanket

ZONAL INFRARED THERMAL BEAUTY BLANKET

MOST WIDELY USE SALON BLANKET IN EUROPE & USA

2 ZONES LOW VOLTAGE FULL-ENCLOSURE INFRARED SAUNA WRAP
FIR WRAP THERMAL BEAUTY BLANKET MY-2B(ii), PROFESSIONAL OR HOME SAUNA USE

The Infrared (FIR) Sauna Wrap MY-2B(ii) is a low-voltage FIR device, with 2 body heating zones simultaneously controlled, suitable for professional use at a spa, weight loss center or beauty salon. Sturdy and made for frequent operation. Provides a complete sauna radiant heat experience. The Infrared FIR Sauna Wrap is also portable and easy to clean, for travel or home use. The direct infrared heat from the blanket allows for gentle radiant relaxation of the muscles and controlled perspiration.

INFRARED SAUNA WRAP

INFRARED SAUNA WRAP MY-2B(ii) SYSTEM COMPOSITION AND FUNCTIONS:

INFRARED SAUNA WRAP

The MY-2B(ii) Infrared (FIR) Sauna Wrap is composed of a control box, a thermal blanket which enfolds the body in a full enclosure, a power cord and 2 connection leads.

1.	Thermal Blanket	conducts heating to the body. Space Carbon Fiber, covered by a layer of PU (polyurethane) fabric
2.	Control Box	adjusts and controls the temperature and timer settings of the thermal blanket.
3.	Power Cord	supplies power to the control box.
4.	Connection Leads (2)	mounted on the blanket, connect the thermal blanket to the control box.

PANEL DISPLAY AND FUNCTIONS OF THE KEYS:

INFRARED SAUNA WRAP CONTROL BOX

ON/OFF

Switch the system 'ON' or 'OFF'

Temperature Key:

Press

to increase or press

to decrease the temperature, 1° C for each time pressed.

Timer Key

Press

to increase or press

to decrease the time, 5 minutes for each time pressed.

‘1’ and ‘2’ Display

Connection Indicator lights shine green when heating has started.

Overload Display

Overload indicator light shines when the power surpasses 300W, and the alarm buzzer will sound.

Start/Stop Key

Press Start/Stop key to start or stop the device after setting the temperature and timer.

INFRARED (FIR) SAUNA WRAP MY-2B(ii) INSTRUCTIONS:

1.	Place the Far Infrared Sauna Wrap on a flat surface, such as the bed or floor.
2.	Wrap your body in the blanket. If a massage or body oil is used, then it is recommended to first wrap the body in a plastic film or sheet to protect the thermal blanket.
3.	Put the control box on a flat surface such as a table and insert the plug into the main power socket.
4.	Connect the leads labeled ‘1’ and ‘2’ between the control box and the thermal blanket. Connect lead ‘1’ to jack ‘1’ and lead ‘2’ to jack ‘2’, otherwise the heating system will not work.
5.	Turn the main power switch on at the rear of the control box. The red ‘Power’ indicator on the control panel will light. The device has not started working yet.
6.	Press the "ON/OFF" key to start setting the temperature and the timer.
7.	Press ‘Timer ’ to set the working time. For each press, the time will increase or decrease by 5 minutes. The default time is 40 minutes.
8.	Press ‘Temperature ’ to set the working temperature. For each press, the temperature will increase or decrease by 1°Centigrade. Set the temperature to your specific requirements. The default temperature is 42°C.
9.	Press "Start/Stop" key. The green indicators "1" and "2" will light, showing that heating has started.
10.	When the heating timer counts down to ‘0’, a signal will sound three times and the digital timer will display ‘0’ showing that heating has finished.
11.	After using the Infrared Sauna Wrap, pull the plug out from power source.
12.	If at any time you need to stop the session, just press the "Start/Stop" key. When the green indicators go out, the system has stopped working.
13.	Wipe the sweat from the surface of the thermal blanket with a wet towel and dry the thermal blanket by laying it flat on a bed or table for more than 1 hour.
14.	Fold the blanket and store it in a cool,dry place.
16.	For professional use at spa, weight loss center or beauty salon, wipe surface of the thermal blanket as above, and leave an interval between customer sessions of at least 1/2 hour, preferably 1 hour.
SUGGESTED USE:
1.	When the room temperature is lower than 20°C, you may preheat the blanket for 10 minutes prior to use.
2.	It is suggested that you be well hydrated by drinking a glass of water prior to using.

INFRARED (FIR) SAUNA WRAP MY-2B(ii) TECHNICAL SPECIFICATIONS:

Model No.	MY-2B(ii)
Input Volts	100V ~120V 60Hz / 220V ~240V 50Hz
Output Volts	DC36V
Material	Made of Nylon, covered by a layer of PU (polyurethane) fabric, with heating elements of Space Carbon Fiber
Input Power	150W(Max.)
Control Panel	Manual Control
Heating Zones	2 (2 connections controlled simultaneously)
Temperature	30°C ~ 60 °C / 86°F~140°F
Separate Heating Zone Control	N/A
Timer	5~95 minutes
Size	180 x 92 cm / 70" x 36 1/4"
Net Weight	8.1kg
Warranty	1 year